DESCRIPTION
Thus-by reducing the risk of puncturing the body many a times, while giving the IV or an injection or collecting a blood sample. In all the cases the patient or the user is happier because it reduces the risk of injecting the veins falsely. The safest LEDs which do not have the UV or infrared radiation are used for this purpose. Vein Trace could be used to map the veins all along the limbs without any difficulty. The specific wavelength RED LEDs used emits the light and thus the veins are clearly visible to the naked eye.
Specifications
- Number of RED LEDs : 6
- 8 volts rechargeable battery pack.
- Charger for charging the device operating voltage: universal.
- Dimensions: 50 x 16 x 160 mm
- Weight: 120 grams
User manual:
Please follow the instruction as follows
- See whether the charge is full by switching on the unit (never look into the Light source directly).
- If fully charged place the Vein Trace on the arm or limb as per the convenience and just push along the skin to trace the veins very easily. The optional holding band supports the user hand to use it comfortably.
- The “U” shaped gap is where the vein is to be traced.
And thus the syringe is to be pushed into the vein without many trials. There are no clinically proven side affects with the Vein Trace and the LED. But general precautions are to be taken while using the same.
- Never look into the LEDs (light source) directly
- Do no operate the unit continuously for more than 5 minutes
- Switch off the unit whenever not in use.
- Charge the unit for 3 hours before first use.
- Remove the charger from the mains always to save the power
- Never connect to the charger and used the Vein Trace as it could lead to accidents.
- Do not clean the transparent protective cover on the LED with any kind of solvents or strong detergents. Wipe it with soft and damp cloth only.
.jpg "image")
.jpg "image"){kind=spacer}
.jpg "image")
.jpg "image")
.jpg "image")
.jpg "image")
.jpg "image")
.jpg "image")
.jpg "image")
.jpg "image")
.jpg "image")
